Purchasing a new furnace may not be a concern in the immediate future. But it’s smart to learn the things that will likely influence your selection when you’re ready to buy. Here are seven things you’ll want to consider when it’s time for furnace replacement in Grand Island.
1. Size and Installation Quality
To operate at maximum efficiency and comfort, your furnace must be properly sized for your home. When it involves furnaces, bigger is certainly not better. We frequently get requests from customers to install a big furnace in the mistaken belief that a larger furnace is either more reliable or will provide better comfort.
The opposite is true. Oversized furnaces will short cycle, or constantly turn on and off. This leaves you uncomfortable, with more expensive energy bills and a furnace that could need replacing much sooner.
This is why it’s important to work with the right company when purchasing a new furnace. Even if it’s the correct size but improperly installed, the U.S. Department of Energy says you could lose as much as 30% of your energy efficiency.
Another key component of installation is ductwork. If yours is old or designed wrong, you might have problems with noise or comfort. A furnace is only as effective as the duct system it’s linked to.
At McElroy Service Experts, our Expert HVAC technicians are ACE certified, which means they’re knowledgeable about repairing and installing various kinds of home comfort systems. Besides technical skill, our technicians are also trained in treating you fairly. We also stand behind our work with a 100% satisfaction guarantee for a year.*
2. Energy Efficiency
Furnaces are rated by a term known as AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this measures the annual gas consumption of a furnace. The greater the number, the less gas is wasted during the heating process.
If your present furnace is 15 years old, it’s likely rated well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re throwing away up to 30 cents of each dollar you spend on heating.
Here’s how AFUE ratings work now:
- 80 AFUE—minimum efficiency rating in the U.S. and Canada.
- 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
- 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
- 98 AFUE—best efficiency rating available.
3. Blower Motor Technology
As you research new furnaces there is one more important consideration: blower technology. This part moves air throughout your home. And it also uses a lot of electricity, so it’s essential to know about your options.
There are three kinds of blowers available on furnaces nowadays. They include:
- Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a traditional blower motor that’s been relatively unchanged for the past 30 years. This motor is the least costly and also the least energy efficient.
- Constant torque motor. This technology strikes a balance between cost and energy efficiency. It delivers an electrical efficiency boost over a traditional motor design.
- Variable-speed motor. The most energy-efficient furnaces can operate at different speeds. Instead of operating at full speed 24/7, they will quietly operate at a low or medium speed at times. This helps improve your comfort while keeping energy costs low, both in the winter and summer. And it also keeps indoor humidity in check.
4. Sound Reduction Technology
Sound has become a very significant consideration with furnace installation, so another dramatic improvement has been noise management. Some of these features include:
- Sealed and insulated cabinets
- Variable-speed blower technology
- Whisper-quiet gas burners
With this technology, you might not even notice that your furnace is on.
5. Smart Thermostat
You probably use a programmable thermostat, but it's quite possible you probably aren’t maximizing your energy savings. These thermostats can be complicated to program, particularly if your schedule changes from day to day.
A smart thermostat eliminates all the guesswork about energy efficiency. Many models can learn from your temperature preferences and then create an energy-saving schedule to match. They also recognize when you’re home or away and will adjust your heating and cooling as necessary.
As a bonus, you’ll also be able to monitor and adjust your settings from just about anywhere on your phone. Some models can even alert you if they detect a problem with your furnace or remind you when it’s time to replace your air filter.
There’s a major difference in furnace quality and reliability. Like any large purchase, we think it’s best to go with a major brand name. With a top brand like Lennox® or Goodman®, you’ll have more confidence in the technology and that the manufacturer will stand by its product warranty over the long haul.
Furnaces usually have two primary warranty coverage areas:
- Heat exchanger. This is the heart of the furnace and the costliest component to replace. This part typically has a 20-year limited warranty or lifetime limited warranty, but this can vary based on the manufacturer and furnace model.
- Main parts. This involves the blower motor, electronic controls, ignitors and other key parts. Warranties can vary from as short as a one-year limited warranty to as much as a 10-year limited warranty.
When reviewing warranty coverage, it’s important to know it's limited. So, you should make sure you understand the restrictions. For instance, nearly all standard manufacturer warranties only cover the price of the replacement part, not labor. And labor on a replacing heat exchanger could get costly.
Once your new furnace is installed, make sure you complete the product registration right away. Many manufacturers may reduce the warranty term if the product registration is not done. This step is simple and usually only takes a few minutes.
How much does all this cost anyway? It could vary from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency system.
As you consider these costs and the affect on your budget, keep in mind that unlike nearly every other appliance you may need to buy, your new furnace may help pay for itself from the monthly energy savings it offers.
A couple of other ways to save include:
- Getting a new air conditioner at the same time.
- Buying at the right time, such as in early fall, mid-winter and early spring. You may be able to get additional discounts and rebates during this slower season.
- Take advantage of rebates from the federal and state government, as well as from your local utility provider. We can help you navigate this process.
- Finance your new furnace or sign up for our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll receive a new furnace with repairs and maintenance included.*
How Do I Know When to Replace My Furnace?
Now that you know what to search for in a new furnace, when should you replace your outdated one? Here are a few tips from our Experts that will help you decide.
Heating systems usually last 15–20 years. How long yours will last depends on whether you’ve kept up with furnace maintenance, where you live and your temperature preferences. If you’re somewhere with harsh winters, your furnace will operate more often, potentially making it wear out sooner. The same applies if you like to keep your home at a warmer temperature.
Repair Frequency and Cost
Just like any appliance, as furnaces age, the potential for frequent furnace repair increases. If your system is more than 15 years old, those repairs can be particularly costly. Common and costly repairs on an older furnace include:
- Blower motor failures
- Ignition control failures
- Heat exchanger failures
If repairs are greater than the half the cost of a new furnace, it’s generally best to replace it.
Furnaces older than 15 years can be extremely inefficient. You could be throwing away as much as 30% of the money you spend to heat your home. Excessive energy costs and the desire to reduce energy consumption are also strong reasons to consider replacing your furnace. In fact, an independent study by Decision Analyst reveals nearly 20% of homeowners who recently replaced their furnace specifically did so to reduce their utility bills.
Trust Your Furnace Replacement to the Experts
It can feel overwhelming trying to investigate furnace features on your own. Or recognize exactly when you should replace your furnace. Our McElroy Service Experts Experts are here to make the process much simpler. Contact us at 308-210-4398 or schedule an appointment online to book your free home comfort assessment today.
*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.